For Farms, Gardens and Landscaping...
Biogize Soil deTox (SD) is a soil conditioner that effectively removes herbicides,
pesticides and other toxins from the soil to provide a safe planting medium.
Because of the wide-spread use of toxins, it may be necessary to
decontaminate the soil when planting vegetable gardens, fruit or ornamental trees, grass or farm crops. You will find that our Biogize SD will provide for lasting and safe soil decontamination while improving seed
Recommended application is 24 ounces (dry weight) of Biogize SD in one gallon of water for every 600 sq ft of area. See our easy mix-n-apply gallon jug for small to medium applications. It can also be applied as a powder on a calm day by sprinkling on the soil surface and tilling into the top 3-6 inches of soil.
Great for organic gardeners and landscapers, Biogize SD is all
natural with no worries of applying too much.
Tree and Shrub Transplanting - Ball and Burlap...
Contamination from residual herbicides and pesticides from the surrounding soil
may be leached into the root zones of freshly planted stock. This can be
significantly reduced by forming a protective barrier of Biogize SD around the
During planting, apply a portion of the recommended amount of Biogize SD over
the ball. Can be applied as a solution or dry. Distribute the remaining Biogize
SD throughout the soil used to fill the hole. Mix at a rate of ½ lb per gallon
Root Balls 12 inches or less in diameter use ½ lb of Biogize SD.
For root balls over 12 inches, use an additional ½ lb of Biogize SD for each
additional six inches in diameter.
Tree and Shrub Transplanting - Bare Root...
The root system of transplants can be protected from possible trace
herbicides in the soil that could injure the plant during the critical period
after planting, by using Biogize SD.
Soak roots in a slurry of 1 lb of Biogize SD per gallon of water for the
recommend time given by plant provider. Transplant while roots are wet.
Also use Biogize SD in the transplant water at a rate of ¼ lb per gallon.
Tree and Shrub Protection - Barrier Method...
Shrubs and trees can be protected from surrounding soil with Biogize SD.
Add Biogize SD by mixing 1 lb per gallon of water and apply into a barrier or
small moat 3-6 inches deep on all sides from which contamination is expected.
Use 1 lb of Biogize SD per 10 linear feet. Repeat as needed.
A coal base powdered activated carbon designed for water purification of
potable water, beverage water, industrial waste water treatment and
decolorizing, deodorizing of food industry and removal of toxins from soil.
Meets AWWA Standard B-600-96 and NSF Standard 61 certified for treatment of
potable drinking water and is totally compatible with all municipal water
Sold by weight not volume.
*This information is from the Manufacturer.
(For more information click below for PDF)
DuPont® Guidelines for Planting Trees on Properties
That have been Treated with Imprelis® Herbicide